Our site uses cookies to give you the best experience. Manage your cookies here or continue shopping if you're happy.

Accept & close
Skip to main content
Basket
    AO BusinessThis site is for trade customers only.Login, or call us on 0330 058 0021.

    Integrated fridge and freezer installation

    Find out everything you need to know about our integrated fridge and freezer installation service.

    Our fully trained team will get your integrated fridge, freezer or fridge freezer set up and ready to go. We’re fully approved by the NICEIC. Don’t know them? They’re only the UK’s leading electrical assessor. Find out what’s included in this service and what you can do to prepare for us.

    What we'll do

    We’ll get your new fridge of freezer fitted in no time. Here’s everything we’ll take care of.

    • We’ll get your new fridge or freezer unpacked once we arrive and we’ll even clean up any mess we make.
    • If you’ve selected our connection service for your new appliance, we’ll happily disconnect your old one for you.
    • Then we’ll attach your new fridge or freezer to your furniture door, make sure it’s level and then put it in place.
    • If you need your fridge or freezer hardwiring, we’ll get that sorted for you too.
    • Chosen our Remove & Recycle service? We’ll take your old fridge or freezer with us when we’re done.

    What you need to do

    We’ll get everything sorted on delivery day, there’s just a few things you need to do and check before we arrive.

    The mechanism for opening your new fridge or freezer needs to be the same as your existing cupboard door. For a sliding hinge, there is usually a plastic rail on the furniture door which allows the door to slide along independently. For a fixed hinge, the appliance door and the furniture door are fixed together with no movement between the two. You’ll find the info you need on the product page under the Key Information tab, or you can see our video here.

    If you’re getting a fridge freezer, the split will need to match the split of your cupboard doors. So, whether your cupboards are top heavy (70/30) or split evenly (50/50), you’ll need to make sure your new fridge freezer matches by checking the Key Information tab on the product page.

    If your cupboards or housing units need any changes to fit your new fridge or freezer, make sure you’ve made them before we arrive.

    Make sure your cupboard doors are in good condition, just so there are no issues when we’re fitting them.

    We can plug in or hardwire your new product. If it needs plugging in, make sure there’s a 3-pin socket (regular plug socket) within 1 metre of where your fridge or freezer is going. Don’t worry if the socket is further away. Just make sure you’ve got an extension lead ready for us to use when we arrive.

    What we don't cover

    Here’s everything our installation service doesn’t cover.

    • We won’t turn on your fridge or freezer because it needs 4 hours to let the cooling gases settle. Just don’t forget to turn it on later, unless you want your milk to be lukewarm.
    • We won’t make any changes to your property. We’re only here to install your new fridge or freezer.
    • We’ll remove all the outer packaging, but we’ll leave any wrapping that’s inside to you. We don’t like to root around too much.
    • Any extra equipment that’s needed, you’ll need to provide.
    • If the opening mechanism for the fridge or freezer isn’t the same as the cupboard door, we won’t be able to install.

    FAQs

    Can I add installation after ordering?
    Will you disconnect my old fridge or freezer?
    How much does integrated fridge and freezer installation cost?
    How soon can I have my fridge or freezer installed?